Cutlass Ciera Cruiser V6-3100 3.1L MFI VIN M (1994)
Fuel Gauge Sender: Service and Repair
Fuel Sender Replacement
Fuel Sender Assembly
Remove or Disconnect
1. Relieve fuel system pressure
2. Drain fuel tank
3. Remove fuel tank See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and Repair
Clean - all fuel pipes and hose connections and surrounding areas before disconnecting to avoid possible contamination of the fuel system.
Disassemble - Using J24187/J24187-A or available tool J36608 remove fuel sender assembly retaining cam, fuel sender assembly and O-ring
from fuel tank. Discard O-ring.
Clean -
fuel sender assembly O-ring sealing surfaces
Assemble
1. Position new fuel sender assembly O-ring on fuel tank
2. Install fuel sender assembly and fuel sender assembly retainer cam using J24187/J24187-A or available tool J36608.
Install or Connect
1. Install fuel tank
2. Add fuel, install filler cap
3. Check for fuel leaks
