Cutlass Ciera Cruiser V6-3100 3.1L MFI VIN M (1994)
Throttle Position Sensor: Electrical Specifications
Throttle Position (TP) Sensor
Voltage ................................................................................................................................................................................... 0.20 - 0.74 volts @ idle
Voltage .................................................................................................................................................................................... Above 4 volts @ WOT
Tech 1 display should vary between 0.2 and 0.74 volts when throttle is closed, to over 4.0 volts when throttle is held at wide open throttle (WOT)
position. Typically, accelerator pedal travel only yields 4.1 or 4.2 volts maximum. If a TP sensor voltage of over 4.8 volts is observed at any point
in normal accelerator pedal travel, replace TP sensor.
