Cutlass Ciera Cruiser V6-3100 3.1L MFI VIN M (1994)
NOTICE:
Relay is covered in foam to prevent rattles and has a six (6) terminal connector (see Figure 1).
6.
Remove and discard relay and inspect all terminals on connector for corrosion. If no corrosion is present, proceed to step 9, otherwise, continue to
step 7.
7.
Replace connector terminals (see Figure 1).
8.
Since corrosion was present, the right upper body side hinge strap may not be properly sealed to the hinge pillar at the front edge of the hinge strap
(see Figure 2).
Reseal hinge strap to pillar at upper front corner and front side using a clear flow grade sealer such as 3M Ultra Pro # 08302, American Sure Seal
# CSC, Kent # 10200, or equivalent (see Figure 2).
