Cutlass Ciera Cruiser V6-3100 3.1L MFI VIN M (1994)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Serpentine drive belt.
3. Power Steering Pump assembly.
4. Electrical connector.
5. Bolt (1).
6. Camshaft position sensor.
INSTALL OR CONNECT
1. Camshaft position sensor.
2. Bolt (1) torque to 10 Nm (8 lb. ft.).
3. Electrical connector.
4. Power Steering Pump.
5. Serpentine drive belt.
6. Negative battery cable.
NOTICE: Follow the installation procedure, taking care not to damage camshaft position sensor pigtail. Route away from electronic components
to avoid Electromagnetic Interferences (EMI).
