Cutlass Ciera Cruiser V6-3100 3.1L MFI VIN M (1994)
Windshield: Customer Interest
Windshield Garnish Molding - Loose
File In Section: 10 - Body
Bulletin No.: 53-16-03
Date: February, 1995
Subject:
Loose Windshield Garnish Molding (Add Retainer Clip)
Models:
1994-95 Buick Century
1994-95 Oldsmobile Cutlass Ciera
CONDITION
Some owners may comment that the windshield garnish moldings are loose from the "A" pillar.
CORRECTION
Install additional retainer clip, in following procedure:
1. Remove molding from the vehicle following the procedure listed in the Shop Manual, Section 10-9.
2. Reinstall the plastic retainers into the slots in the retainer housing of the molding.
3. Insert and fully seat retainer, P/N 12338108, as shown in Figure 1. This retainer will close off the end slot in the retainer housing and prevent the
plastic retainer from sliding out.
4. Reinstall molding to windshield pillar and along roof to lock pillar.
PARTS INFORMATION
Parts are currently available from GMSPO
WARRANTY INFORMATION
For vehicles repaired under warranty, use:
