Cutlass Ciera Cruiser V6-3300 3.3L (1989)
19.
Splice the dark green # 533 wire from cavity D of the new relay connector to the black with pink stripe # 533 wire of cavity E of the existing
cooling fan relay connector and cover the splice with heat shrink tubing.
Important:
Use the approved splicing materials and instructions as shown in the appropriate Service Manual.
20.
To ground the new relay and fan motor, install the black wire ring terminal of the wiring harness to the relay mounting bracket by replacing one of
the mounting screws with screw, P/N 11509135.
21.
Install the grille.
22.
Replace the existing ECM Memory Calibrator (MEMCAL) with the new appropriate Calibrator, using the procedures specified in the Service
Manual.
23.
Connect the negative battery cable.
24.
Check for proper operation of the new pusher type cooling fan.
WARRANTY INFORMATION:
Labor Operation Number:
T1745
Labor Time:
2.8 hours
Trouble Code:
92
LABEL A/C CHARGE SPECIFICATION
