Cutlass Ciera Cruiser V6-3300 3.3L (1989)
Power Steering Pump: All Technical Service Bulletins
P/S - Pulley May Cut Wire Harness
SUBJECT:
POWER STEERING PULLEY MAY CUT WIRE HARNESS (REPAIR AND SECURE HARNESS)
MODELS/YEARS:
1989 CUTLASS CIERA WITH 3300 LG7 ENGINE
NUMBER:
89-T-31
CORP. REF. NO: 838119
DATE:
January 1989
SECTION:
6D
FIGURE 1
CONDITION:
The power steering pulley may contact the engine wiring harness during engine roll on a 1989 Cutlass Ciera with 3300 (LG7) engine. The condition may
be reported as loss of blower motor, or a driveability condition if the fusible link is not carrying current.
CAUSE:
Wire harness is not properly secured to the dash, particularly in the area of the wiring to the blower motor. This condition was corrected in production
about October 31, 1988. VIN Breakpoints are listed below:
Plant
Beginning
Through and Including
Framingham
Start of Production
KG312113
St. Therese
Start of Production
K2335413
CORRECTION:
