Cutlass Ciera Cruiser V6-3300 3.3L MFI VIN N (1993)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Tools Required:
J 36660 Torque Angle Meter
J 37096 Flywheel Holding Tool
J 38197 Crankshaft Balancer Remover
Crankshaft Balancer Assembly
Remove or Disconnect
1. Serpentine belt.
2. Raise vehicle and suitably support.
3. Right front wheel and tire assembly.
4. Right engine splash shield.
5. Flywheel access cover.
Holding Flywheel Using J 37096
6. Balancer bolt while holding flywheel using J 37096.
7. Crankshaft balancer using J 38197.
Important
