Cutlass Ciera Cruiser V6-3300 3.3L MFI VIN N (1993)
Suspension Spring ( Coil / Leaf ): Service and Repair
Rear Coil Spring
Fig. 3 Coil Spring & Insulator Installation. Except AWD Models
1.
Raise rear of vehicle and support rear axle using a jack.
2.
Remove right and left brake line bracket attaching bolts from frame and allow brake lines to hang freely.
3.
Remove track bar attaching nut and bolt at rear axle, then disconnect track bar.
4.
Disconnect shock absorbers at lower mountings. Do not suspend rear axle by brake hoses since damage to hoses may result.
5.
Carefully lower rear axle assembly, then remove springs and insulators.
6.
Reverse procedure to install, Fig. 3.
