Cutlass Ciera FWD L4-151 2.5L (1982)
2.
J 34995 into front cover - lubricate seal lip with clean engine oil.
3.
Apply RTV sealant to timing gear cover sealing surfaces.
4.
Timing gear cover to engine.
5.
Brake line bracket to frame.
6.
Crank pulley and bolt.
7.
Flywheel cover and bolts.
8.
Lower vehicle.
9.
Raise frame assembly with support fixture.
10.
Install (4) frame bolts finger tight.
11.
Remove engine fixture.
12.
Raise vehicle.
13.
Tighten frame bolts.
14.
Lower ball joint; use new pinch bolt.
15.
Steering shaft pinch bolt.
16.
Engine splash shield.
17.
Both front wheels.
18.
Lower vehicle.
19.
Front hood bumpers
20.
Engine torque strut.
21.
Tensioner-as applicable.
Clean
-
Tensioner and block sealing surfaces. Do not remove sealing ring. Apply RTV around sealing ring.
22.
Timing pointer plate (as applicable).
23.
Accessory drive belt(s).
24.
Engine oil (replace oil filter).
25.
Coolant.
26.
Negative battery cable.
27.
Check front wheel toe-in and adjust if necessary.
Inspect
-
For oil and coolant leaks with engine running at operating temperature.
-
For proper completion of repairs.
Warranty Information
1987-88 Cutlass Ciera
