oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Engine - Stalls on Drive/Reverse Engagement|Page 2623 > < Engine - Stalls on Drive/Reverse Engagement|Page 2621
Page 3
background image

FIGURE 3 - REMOVING SOLENOID

SERVICE ACTION: (Figure 3)

The new solenoid can be used to service all past THM 125C transaxle models. Remove the side cover and replace the solenoid and conduit assembly
(on-car service).
SERVICE PARTS INFORMATION:

8665016

Solenoid and Conduit Assembly - 1988 KDC Model Only

8652379

Solenoid and Conduit Assembly - All Other Models

Cars equipped with the 4.3L diesel engine should use the following parts:

8652377

Solenoid and Conduit Assembly - 1982-84 Models

8652376

Solenoid and Conduit Assembly - 1985 Models

SERVICE NOTES:

To properly diagnose the condition of the suspect Windsor built transaxles, assure that stabilized operating temperatures are obtained during normal road
evaluation phase of routine preliminary predelivery procedure.

Engine - Stalls on Drive/Reverse Engagement|Page 2623 > < Engine - Stalls on Drive/Reverse Engagement|Page 2621