oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Cross-Member|Service and Repair|Page 8461 > < Control Arm|Description and Operation|Page 8457
Page 1
background image

Cross-Member: Service and Repair

^

Tools Required: 
-

J 35778 Rear Leaf Spring Compressor 

-

J 36660 Torque Angle Meter   

-

Or Equivalent

NOTICE:  Do not use corrosive cleaning agents, silicone lubricants, engine degreasers, solvents, etc., on or near the fiberglass rear transverse spring.
These materials could cause extensive damage to the spring.

Remove or Disconnect  

1. Raise vehicle and suitable support. 

2. Jack pad.
3. Exhaust system, if equipped with dual exhaust system. Refer to Brakes and Traction Control. 

4. Spring retention plates.

Cross-Member|Service and Repair|Page 8461 > < Control Arm|Description and Operation|Page 8457