oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Power Window Switch|Page 11321 > < Power Window Switch
Page 2
background image

REMOVE OR DISCONNECT

1. Mounting plate and switch from trim panel.
2. Electrical connector(s).
3. Switch from mounting plate.

INSTALL OR CONNECT

1. Switch tabs into mounting plate slots and snap in to secure.
2. Electrical connector.
3. Switch and mounting plate to trim panel by snapping in to secure.

Rear Door - Sedan

POWER WINDOW SWITCH

Rear Door - Sedan

gc97wcoby_106-072c

REMOVE OR DISCONNECT

1. Screws from switch plate assembly.
2. Switch plate assembly from trim panel.
3. Retainer(s) from connector(s).
4. Connector(s) from switch plate assembly.

INSTALL OR CONNECT

1. Connector(s) to switch plate assembly.
2. Retainer(s) to connector(s).
3. Switch plate assembly to trim panel cutout. Press firmly to secure.
4. Screws to switch plate assembly.

TIGHTEN

^

Screws to 1.9 Nm (17 lb. in.).

Power Window Switch|Page 11321 > < Power Window Switch