Cutlass Supreme V6-204 3.4L DOHC VIN X SFI (1995)
Tools Required
-
J38616-A Camshaft timing clamps.
-
J38614 Camshaft sprocket holding tool.
-
J36660 Torque angle meter
1. Remove camshaft timing belt tensioner.
2. Remove tensioner pulley/arm assembly.
3. Set crankshaft timing mark TDC position on from cover.
4. Install J38613-A timing belt clamps on both banks.
5. Scribe or use a paint pen to mark both camshaft sprockets inside centers, on both banks, only if original timing marks are not present.
6. Remove J38613-A timing clamp from left front bank, and rotate cam sprockets so that the timing marks are opposite of each other. Use a straight
