Cutlass Supreme V6-204 3.4L DOHC VIN X SFI (1995)
Knock Sensor: Service and Repair
Knock Sensor And 3x Crank Sensor
REMOVE OR DISCONNECT
1. Raise vehicle.
2. Intermediate exhaust pipe.
3. Rack and pinion heat shield.
4. Generator air cooling duct.
5. Electrical connector at knock sensor.
6. Knock sensor from engine block.
INSTALL OR CONNECT
1. Knock sensor in engine block. Be sure threads are clean.
Tighten
Knock sensor to 19 Nm (14 lb. ft.).
CAUTION: Overtorquing can damage the knock sensor.
2. Electrical connector at knock sensor.
3. Generator air cooling duct.
4. Rack and pinion heat shield.
5. Intermediate exhaust pipe.
