Cutlass Supreme V6-204 3.4L DOHC VIN X SFI (1995)
III.
Windshield upper reveal gaps to the roof of less than 2 mm or less (See Figure 2).
1.
With 1/2 inch masking tape, tape the upper reveal molding all the way across the roof following the rear most edge of the reveal molding.
Tape the roof at the rear edge of the molding all the way across the car.
2.
Using GM Goodwrench RTV Silicone Rubber Sealer. P/N 12345739 (or equivalent), and the nozzle from the package, fill the gap between
the molding and the roof.
3.
Remove the tape and clean any excess sealer on the molding and the body with adhesive cleaner.
Labor Operation
Labor Time
B7540
Use published labor operation time.
