Cutlass Supreme V6-204 3.4L DOHC VIN X SFI (1995)
7.
Install NEW design switch following instructions outlined in the Service Manual. Ensure wire is correctly positioned as shown,
8.
Connect negative battery cable.
9.
Enable SIR system; refer to "Enabling the SIR System" in Section 3F of the Service Manual.
10.
Install GM Campaign Identification Label.
Campaign Identification Label
Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label".
Each label provides a space to include the campaign number and the five (5) digit dealer code of the dealer performing the campaign service. This
information may be inserted with a typewriter or a ball point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in by the
customer for periodic servicing. When installing the Campaign Identification Label, be sure to pull the tab to allow adhesion of the clear protective
covering. Additional Campaign Identification Labels can be obtained from VISPAC Incorporated by calling 1-800-269-5100 (Monday-Friday, 8:00 a.m.
to 4:30 p.m. EST). Ask for Item Number S-1015 when ordering.
Apply the "Campaign Identification Label" only on a clean, dry surface.
Claim Information
