Cutlass Supreme V6-260 4.3L DSL (1985)
Technical Service Bulletin # 85I3A
Date: 850101
Wheels - Locking Wire Wheel Covers
SUBJECT
N91 - LOCKING WIRE WHEEL COVERS
NUMBER: 85-I-3A
DATE:
Jan. 17, 1985
MODELS/YEARS
1985 MODELS
SECTION: 9
The custom locking wire wheel cover package (Option N91) is shipped in the trunk compartment.
At the time of delivery of a new vehicle by the carrier, the contents of the package containing Option N91 are to be inspected for missing or incorrect
parts. The contents of Option N91 should include:
Four (4) Wire Wheel Covers with Lock Nuts
One (1) Lock Key Wrench
Four (4) Lock Brackets
One (1) I.D./Registration Card & Instructions
Four (4) Emblems
Twelve (12) Flanged Lug Nuts (installed on
Wheels)
NOTE:
1985 Ninety-Eights have only six (6) flanged lug nuts installed on rear wheels, and two (2) lock brackets placed in the trunk compartment.
Any discrepancies are to be noted on the delivery receipt and a transportation claim is to be filed for any missing or incorrect parts.
Replacement of Missing, Incorrect or Lost Parts
Lock key wrenches and/or I.D./Registration Cards are available from Norris Industries, Thompson Industries and Wire Wheel Cover.
A.
Lock key wrench missing upon delivery of vehicle from factory or lost at dealership after delivery.
Send I.D./Registration Card along with a check in the amount of $8.00 for the replacement lock key wrench to the applicable company.
B.. I.D./Registration Card missing
Provide the applicable company with the color of the stripe and/or the letter stamped in the shaft on the lock key wrench. A new color coordinated
I.D./Registration Card will be forwarded to the dealership.
C.
Lock key wrench does not fit lock bolt or nut.