oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Turn Signal Lever - Does Not Stay in Detent Position|Page 8085 > < Diagram Information and Instructions|Page 8076
Page 1
background image

Turn Signal Switch: Customer Interest
Turn Signal Lever - Does Not Stay in Detent Position

File In Section: 3 - Steering/Suspension

Bulletin No.: 43-32-05A

Date: December, 1994

Subject:
Turn Signal Lever Will Not Stay in Detent Position (Reroute Wires/Replace Switch)

Models:
1994 Buick Regal
1995 Chevrolet Lumina, Monte Carlo
1994 Oldsmobile Cutlass Supreme
1994 Pontiac Grand Prix

This bulletin is being revised to include the 1995 Chevrolet Lumina and Monte Carlo and update part number information. Please discard corporate
Bulletin Number 433205 (Group Reference - Steering/Suspension). 

Condition

The customer may comment that when signaling for a right-hand turn, the lever will not stay in the detent position. There are two possible causes for this
condition:

Cause # 1

Turn Signal Lever - Does Not Stay in Detent Position|Page 8085 > < Diagram Information and Instructions|Page 8076