Cutlass Supreme V8-307 5.0L VIN Y 4-bbl (1985)
2.
Part number, if shown, Manufacturer's Name and Model Number that appears on the label of the seat belt assembly along with the color of the
webbing. Colored extenders for past model vehicles are furnished on an "as material available basis" only. If webbing of the color designated for a
past model vehicle is not available, the extension will be furnished in black.
FIGURE 2
The label (Figure 2) which is stitched to the webbing is located either slightly above where the webbing attaches to the floor (near the door) or
in the retractor. The label on the webbing stowed inside the retractor can be found by fully extracting the webbing from the retractor. Note
information below.
FIGURE 3
3.
Measurement in inches
Place the seat in the position that it is in when you drive or ride in the car. With you sitting in the seat, make sure that the buckle is extended as
far through the seat as possible. This may be done by giving the buckle a hard pull. With the buckle resting against your hip, measure from the
lap area directly below the navel to the front edge of the buckle (Figure 3) and note dimension below.
*NOTE:
If measurement is 12 inches (304.8 mm) or less, a seat belt extender is not available.
With this information, we can supply a seat belt extender tailored for your personal use that will maintain the proper seat belt orientation.
Body of Letter To Be Included With The Seat Belt Extender
