Cutlass Supreme FWD V6-189 3.1L (1989)
114. Install throttle and T.V. cables at TBI unit.
115. Install fuel lines at TBI unit.
116. Install necessary ECM harness fasteners to chassis.
117. Install ECM harness through cowl and connect at ECM.
118. Refill coolant system with new coolant. Add two (2) engine cooling system sealer pellets from package, (P/N 3634621), to the radiator. Coolant
must be mixed with equal amount of water to provide proper protection.
119. Install engine oil.
120. Install air cleaner assembly.
121. Connect battery cables.
122. Check engine timing and tighten distributor retainer. Refer to service manual section 6D4.
123. Check and adjust toe.
124. Recharge A/C system. Refer to service manual for recharging procedure, section 1B.
125. Start engine and verify no fluid leaks.
126. Reset clock.
END OF SERVICE PROCEDURE FOR SILHOUETTE GOODWRENCH ENGINE REPLACEMENT
PARTS INFORMATION
