Cutlass Supreme FWD V6-189 3.1L (1989)
Figure 2
10.
Add adhesive back felt strips to back of cluster bezel and front of carrier as shown in Figure 2 (4 locations).
11.
Remove radio speakers and apply 3M (R) Foam Rubber # 06370 cut in 1/2 inch squares opposite attachments. See Figure 2.
12.
Apply 2 inch strip of foam tape to carrier beneath forward edge of radio, and a 1-1/2 inch strip at left side of carrier as indicated in Figure 2.
13.
Reinstall all previously removed parts.
14.
Check glove box door for rattle by taping lightly on door in closed position. If rattle is present, add strips of foam as required to eliminate rattle
condition.
Warranty Information:
