Cutlass Supreme FWD V6-189 3.1L (1989)
FIGURE 2
DELAY RELAY INSTALLATION
14.
Remove lower sound insulator panel and steering column trim panel.
15.
Disconnect translator module from steering column wiring harness. Module is a clear plastic box located on right side of steering column. (See
Figure 2)
16.
Connect delay relay, P/N 16135280 in series with translator module.
17.
Tape relay and translator module together and tuck them up next to steering column.
18.
Reinstall steering column trim panel and lower sound insulator.
A/C CONTROL HEAD REPLACEMENT
19.
Remove instrument cluster trim plate. Tilt top of trim plate downward releasing clips that mount the bottom of the plate to the dash.
20.
Remove accessory trim center plate or sport pad assembly by again tilting the top downward to release clips.
21.
Remove A/C control head.
22.
Install new A/C control head, (See previous A/C control Head chart for part number)
23.
Reinstall accessory trim center plate or sport pad and cluster trim plate.
24.
Reconnect negative battery cable.
WARRANTY INFORMATION:
If relay is installed use:
Labor Operation Number:
T1414
Labor Time:
0.9 Hours
Trouble Code:
92
If relay is not installed use:
Labor Operation Number:
T1415
Labor Time:
0.7 Hours
Trouble Code:
92
