oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Electric Clock - Repair Information|Page 4061 > < Diagram Information and Instructions|Page 4056
Page 1
background image

Clock: Technical Service Bulletins
Electric Clock - Repair Information

SUBJECT

WARRANTY REPAIR ON BORG AND

NUMBER:  84-I -3

GENERAL TIME CLOCKS

DATE:

Sept. 15, 1983

MODELS/YEARS

ALL 1984 MODELS

SECTION:  9

Oldsmobile electric clocks are warranted under the "New Vehicle Warranty" for 12 months or 12,000 miles, whichever first occurs. When a
malfunctioning clock is removed during the warranty period, it must be sent to the responsible manufacturer for repair.

Oldsmobile Division currently uses clocks from two manufacturers, Borg Instruments and General Time. Obtaining warranty repair for clocks from these
manufacturers is covered in this bulletin...

Manufacturer's identification is essential and is either stamped on the housing or printed on a label on the clock housing. If the manufacturer's stamped
name cannot be read, darken the letters with a lead pencil. This will enable you to identify the manufacturer.

FIGURE 1

NOTE:

IT IS IMPORTANT THAT A 728-OLDS TAG (Rev. 4-75) (Fig. 1) BE PROPERLY COMPLETED WITH THE FOLLOWING
INFORMATION AND ATTACHED TO ALL BORG INSTRUMENTS AND GENERAL TIME CLOCKS RETURNED FOR REPAIRS. IF
COMPLETE INFORMATION IS NOT FURNISHED OR NO DEFECTS ARE FOUND, DEALERS MAY BE BILLED FOR THE REPAIR
AND/OR TESTING. THE DESCRIPTION OF MALFUNCTION SHOULD BE CLEAR AND CONCISE AS FOLLOWS:

^

Clock Dead (No Movement or Sound)

^

If Condition is Intermittent, Give Details

^

Runs Backward

^

Gains Time

^

Loses Time

^

No Light

^

Noisy

^

Blows Fuses

^

Can't Set Time

^

Scratched/Distorted Lens

^

Loose Terminal/Broken Light Socket Hose

TAG 728-OLDS (REV. 4-75) MUST CONTAIN THE FOLLOWING:

Dealer Firm Name, Street Address, City, State, Zip Code

Dealer Code

R.O. Number and Date

Delivery Date (if Sold)

Electric Clock - Repair Information|Page 4061 > < Diagram Information and Instructions|Page 4056