Delta 88 V8-305 5.0L VIN H 4-bbl (1984)
FIGURE 8 - TOP STRAP ANCHOR INSTALLED - 98 2-DOOR(37)AND 4-DOOR (69) STYLES
STEP NO. 1
From the trunk area on the underside of the filler panel locate the appropriate existing 9 mm hole (69 styles), or locate and drill the appropriate 9 mm
hole (37 styles).
STEP NO. 2
Using a punch or other sharp tool, make a locating hole through the center of the trim covering the 9 mm hole.
STEP NO. 3
From inside the vehicle cut a 9 mm (11/32") hole through the filler panel trim and insulation using the locating hole as a guide.
