Eighty-Eight Royale FWD V6-3.8L SC VIN 1 (1995)
Determine whether or not the fascia can be repaired before replacing the fascia by doing the following in a shaded area or indoors:
1.
Remove push-in retainers at the license pocket opening (see Figure 1).
2.
Loosen impact bar retaining nuts.
Important:
The impact bar to energy absorber nuts should be as loose as possible to allow for maximum rearward movement.
3.
Push impact bar as far rearward as possible.
4.
Install as many 3 mm shims, P/N 25637894, as possible into the space created between impact bar and energy absorbers (see Figure 2).