Eighty-Eight Royale FWD V6-3.8L VIN K (1996)
Timing Cover: Service and Repair
Removal
Front Cover
Tools Required:
J 37096 Flywheel Holding Tool
J 38197 Crankshaft Balancer Puller
J 28467 Engine Support Fixture
J 38854 Lift Bracket
J 36660 Torque Angle Meter
REMOVE OR DISCONNECT
1. Torque axis mount.
2. Drive belt(s).
3. Crankshaft balancer with J 38197 or equivalent.
4. Sensor shield.
5. Crankshaft sensor.
6. Oil pan to front cover bolts.
7. Front cover attaching bolts and cover.
8. Inspect:
-
Timing chain for overall "in and out" movement. Should not exceed 25 mm (one inch).
-
Sprockets for wear.
9. Clean gasket mating surfaces at timing chain cover, and cylinder block.
-
If oil pan gasket is excessively swollen, the oil pan must be removed and the gasket replaced.