Eighty-Eight Royale FWD V6-3.8L VIN K (1996)
Tool Required:
J 37097 Hose Clamp Pliers
Remove or Disconnect
1. Drain cooling system.
2. Heater hoses from heater core, using J 37097.
3. Programmer, See: Control Module HVAC/Service and Repair
4. Retaining screws and heater core cover.
5. Retaining screws and heater core from vehicle.
Install or Connect
1. Heater core into vehicle and attaching screws.
2. Tighten screws to 1.4 Nm (12 lb.in.).
3. Heater core cover and attaching screws.
4. Tighten screws to 1.4 Nm (12 lb.in.).
5. Programmer, See: Control Module HVAC/Service and Repair
6. Tighten screws to 1.4 Nm (12 lb.in.).
7. Heater hoses to heater core using J 37097.
8. Fill cooling system.