Firenza L4-121 2.0L (1983)
Seat Track: Customer Interest
Manual Seat Adjuster - Lateral Movement
SUBJECT MANUAL SEAT ADJUSTER LATERAL MOVEMENT
NUMBER: 84-T-22A
DATE:
May 13, 1985
MODELS/YEARS
1983-84 FIRENZA
SECTION:
10
This bulletin is being reissued to provide part numbers for the passenger side OUTER adjusters.
If a lateral movement of the inner seat adjuster is experienced, perform the following operations:
1.
Remove seat and place on a clean protected surface.
2.
Replace seat adjuster(s) with new adjuster(s).
Part Number
Description
20329374
Passenger's Outer (Coupe)
20329375
Passenger's Outer (Sedan)
20162884
Passenger's Inner (Coupe)
20162885
Passenger's Inner (Sedan)
20330804
Driver's Inner (Coupe)
20330805
Driver's Inner (Sedan)
3.
Install release wire (part no. 20162898) between lock bars.
4.
If the adjuster-to-floor attaching stud is loose in the floor, weld the stud (mig or gas with steel rod only) into place using standard body shop repair
procedure for structural components.
5.
Install seat to floor and tighten seat adjuster-to-floor pan attaching nuts 20 to 28 N-m (15 to 21 ft.lbs.).
WARRANTY INFORMATION
Add .5 hour per side to the published operation number if stud requires welding.