Firenza L4-121 2.0L VIN K TBI (1987)
Piston: Service and Repair
Piston & Rod Assemble - Overhead Cam
Piston & Rod Assemble
Fig. 12 Piston & rod assembly
Assemble piston to rod, with arrow on piston facing toward front of engine and numbered side toward intake manifold side of engine, Fig. 12. Upon
installation, measure connecting rod side clearance using a suitable feeler gauge. Side clearance should be .0027 to .0095 inch.
Pistons, Pins & Rings
Pistons and rings are available in standard size and oversize of .020 inch (.5 mm). Piston pins are available in standard size only.
