Firenza V6-173 2.8L (1986)
7. Negative battery cable
REAR ENGINE MOUNT - J SERIES
REMOVE OR DISCONNECT
1. Negative battery cable
2. Raise car
3. Support engine.
4. Engine mount nuts
5. Bolt
6. Mount
INSTALL OR CONNECT
1. Mount
Tighten
^ Tighten nuts to specifications
Note If rear engine mount bracket is removed, the following procedure should be used to ensure proper engine mount bracket location.
a Loosely install engine mount bracket.
b. Raise engine and transaxle.
c. Tighten engine mount nuts and bolts to specifications.
2. Remove engine support
3. Lower car.
4. Negative battery cable