Firenza V6-173 2.8L (1986)
toe-in, install shim kit, part number
14094481. Installation of the two shims in the kit, one at each axle end, will reduce toe-in by .4~. Follow instructions included in kit for proper
installation.
CAUTION: Use only GM part number 14094481 shim kit. Use of other parts may cause bolt torque loss which could result in the loss of a wheel and
resulting damage and/or personal injury.
FIGURE 1
If tires are replaced, put the two (2) new tires on the front and move the front tires to the rear position. After 7,500 miles, tires should be rotated
following the modified "X" pattern. See Figure 1.
If the tires are not replaced, rotate the tires using the modified "X" pattern. This will tend to even out normal heel/toe tread wear.
PARTS INFORMATION
One (1) shim kit part number 14094481.
Kit includes:
Two (2) shims (part number 14094467) Eight (8) bolts (part number 25519720) One (1) instruction sheet (part number 14094482)
WARRANTY INFORMATION
Trouble Code
Labor Operation
Labor Hours
92
T1141
.7
Technical Service Bulletin # 92T203
Date: 911201
Alignment - Lead/Pull, Torque/Memory Steer
NUMBER:
92-T-20
CORP. REF. NO.: 073002R
DATE:
December 1991
SECTION: 3