Firenza V6-173 2.8L (1986)
FIGURE 1 - CRUISE CONTROL SERVO AND BRACKET
12.
Install cruise control servo with bracket and tighten nuts to 28 N-m (20 ft.lbs.). See Figure 1.
13.
Fill and bleed power steering system as described in Section 3B1 of the Firenza Service Manual.
This return hose assembly consists of a coupled hose and pipe which has been specially tuned to significantly reduce vibration. Because of these special
characteristics, the new return hose assembly should not be shortened or modified in any way.
After installation of the new return hose assembly, inspect the system to ensure that the hose and pipe are properly positioned and are not contacting
other parts of the car. Contact of the hose or pipe with the cowl may allow steering noise to be transmitted into the passenger compartment.
WARRANTY INFORMATION
Labor Operation:
E8904
Labor Time:
1.1 hrs.
Trouble Code:
92
