Firenza V6-173 2.8L (1986)
FIGURE 3 - LATE DESIGN SYSTEM (CURRENT PRODUCTION)
8.
Connect left turn cylinder pipe at gear. Tighten fitting to 27 N-m (20 ft.lbs.).
9.
Install two retainers for power steering pipes. Refer to Figure 3.
NOTE:
Use plastic tie straps if original retainers cannot be used.
10.
Install pressure switch manifold and pressure pipe between manifold and steering gear. Tighten all fittings to 27 N-m (20 ft.lbs.).
11.
Install power steering pressure switch and tighten to 12 N-m (108 in.lbs.).
