Firenza V6-173 2.8L (1986)
Suspension Spring ( Coil / Leaf ): Service and Repair
Fig. 2 Rear shock absorber upper attachment components
Fig. 4 Coil spring installation
1.
Raise and support rear of vehicle. Support rear axle using a suitable jack.
2.
Remove wheel and tire assemblies.
3.
Remove brake line bracket attaching bolts from frame, Fig. 2, and allow brake lines to hang freely.
4.
Remove shock absorber to lower mounting bracket bolts, then disconnect shock absorbers from axle assembly. Do not suspend rear axle by
brake hoses since damage to hoses may result.
