Intrigue V6-3.8L VIN K (1998)
Keyless Entry Receiver: Service and Repair
REMOVAL PROCEDURE
Receiver Replacement
1. Remove the instrument panel upper trim pad.
2. Release the remote control door lock receiver from the instrument panel by releasing the retainer tabs.
3. Remove the remote control door lock receiver.
4. Disconnect the electrical connector.
INSTALLATION PROCEDURE
Receiver Replacement: Installation Procedure
1. Connect the electrical connector.
2. Install the remote control door lock receiver to the instrument panel.
^
Pressing into place until the retainers are fully seated.
3. Remove the instrument panel upper trim pad.
