oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Transmitter Programming|Page 10813 > < Transmitter Programming|Page 10811
Page 1
background image

Keyless Entry Transmitter: Service and Repair
Transmitter Battery Replacement

Under normal use, the battery in the remote control door lock transmitter will last about 2 years.

The battery is weak if the transmitter does not work at the normal range in any location. If you have to get close to the vehicle before the transmitter
works, change the battery.

Removal Procedure

Transmitter Battery Replacement: Removal Procedure

1. Insert a dime or a flat-bladed tool into the slot on the side of the transmitter in order to disassemble the transmitter.
2. Twist the dime or tool in order to separate the halves.
3. Remove the battery from the transmitter.

Installation Procedure

Transmitter Battery Replacement: Installation Procedure

1. Install the battery into the transmitter.
2. Reassemble the transmitter.
3. Ensure that the halves snap together tightly in order to prevent water intrusion.
4. Test for proper transmitter operation. Refer to Remote Keyless Entry System Operation.  See: Description and Operation/System Operation
5. Synchronize the transmitter, as needed. Refer to Transmitter Synchronization.

Transmitter Programming|Page 10813 > < Transmitter Programming|Page 10811