Intrigue V6-3.8L VIN K (1998)
Sun Shade: Service and Repair
Sunshade Replacement
REMOVAL PROCEDURE
The sunshades can be equipped with an illuminated vanity mirror. The illuminated vanity mirror is not serviced as a separate unit.
Sunshade Replacement: Removal Procedure
1. Fold the sunshade so the bottom edge is pointing straight down.
2. Unsnap the sunshade from the retainer and position the sunshade just behind the sunshade retainer (between the retainer and windshield).
3. Using a flat-bladed tool, insert the tool into the slot on the sunshade retainer shaft.
4. Holding the flat-bladed tool stationary, slowly rotate the sunshade, about four (4) inches towards the rear of the vehicle while gently pulling
downward.
Sunshade Replacement: Removal Procedure
5. Push upward on the free end of the sunshade assembly and continue to rotate towards the side glass for the remainder of the travel.
6. Pull down on the sunshade to release it from the sunshade bezel on the headliner.
7. Disconnect the electric connector if equipped.
8. Remove the sunshade from the vehicle.
9. Remove the sunshade retainer bezel, by inserting a small flat-bladed tool into the slots and moving the locking tab inward.
