Intrigue V6-3.8L VIN K (1998)
TIGHTEN
ABS brake modulator/master cylinder nuts (8) to 27 Nm (20 lb ft).
2. Install four brake pipes (5) onto the ABS brake modulator/master cylinder assembly (7).
TIGHTEN
Tube nuts to 24 Nm (18 lb ft).
3. Connect the ABS brake motor pack 6-way electrical connector (6).
4. Connect the brake fluid level indicator sensor electrical connector (2).
5. Connect two brake solenoid valve electrical connectors (1), (3).
6. Bleed the system. Refer to Brake System Bleeding.