Intrigue V6-3.8L VIN K (1998)
Brake Pedal Assy: Service and Repair
Brake Pedal Replacement
REMOVAL PROCEDURE
1. Remove the driver's side instrument panel insulator. Refer to Insulator Replacement - IP in Instrument Panel, Gauges and Warning Indicators.
2. Remove the stoplamp switch. Refer to Stoplamp Switch Replacement.
3. Remove the cruise control release switch (if equipped).
4. Remove the Body Control Module for clearance. Refer to Body Control Module Replacement in Body Control System.
5. Remove the wiring harness clips.
6. Remove the master cylinder pushrod retaining clip at the brake pedal.
7. Remove the brake pedal mounting nut (10) and bolt (9) on the top and back of the brake pedal bracket.
8. Remove the brake pedal (7) and bushings (4), if necessary.
9. Clean all the parts with a suitable solvent.
10. Inspect all the parts for wear. Repair or replace any damaged parts.
INSTALLATION PROCEDURE
