Intrigue V6-3.8L VIN K (1998)
13. Remove the brake caliper bolts (1 and 3).
NOTICE: Do not allow calipers to hang from the flexible hoses. Doing so can damage the hoses.
14. Remove the brake caliper (15) from the brake caliper bracket (12).
15. Use a strap or heavy gage wire in order to support the brake caliper.
16. Inspect the brake caliper piston boot (8) for the following conditions:
-
Cuts
-
Tears
-
Deterioration
Replace the brake caliper piston boot if damage exists. Refer to Brake Caliper Overhaul - Rear.
17. Inspect the brake caliper bolt boots (4) for the following conditions:
-
Cuts
-
Tears
-
Deterioration
Replace the brake caliper bolt boots if damage exists. Refer to Brake Caliper Bracket Replacement- Rear.
18. Inspect the caliper bolts for corrosion or damage. If corrosion is found on the brake caliper bolt shaft, replace the brake caliper bolt, replace the
brake caliper bolt bushing, and replace the brake caliper bolt boot. Do not attempt to polish away the corrosion.
INSTALLATION PROCEDURE