Intrigue V6-3.8L VIN K (1998)
8. Remove the lower brake caliper bolt.
9. Rotate the brake caliper (2) upward in order to access the brake pads.
10. Remove the brake pads (5) from the brake caliper bracket (3).
11. Remove the brake pad retainers (4) from the brake caliper bracket (3).
IMPORTANT: Insert a block of wood or the old brake pad brake between the C-clamp and the brake caliper piston in order to prevent damage
to the brake caliper piston and the brake caliper piston boot.
12. Install a C-clamp over the brake caliper and against the block of wood or the old brake pad.
13. Tighten the C-clamp until the brake caliper piston pushes completely into the brake caliper bore.
14. Remove the C-clamp from the brake caliper.
