Intrigue V6-3.8L VIN K (1998)
NOTICE: Do not allow calipers to hang from the flexible hoses. Doing so can damage the hoses.
7. Use a strap (2) or heavy gage wire in order to support the brake caliper (1) and the brake caliper bracket.
8. Remove the brake rotor.
INSTALLATION PROCEDURE
1. Clean any corrosion from the brake rotor flange.
2. Use the J 42450-A in order to clean the hub flange.
3. Install the brake rotor.
4. Install the brake caliper bracket with the brake caliper. Refer to Brake Caliper Bracket Replacement- Front.
5. Install the tire and wheel. Refer to Wheel Installation in Tires and Wheels.
6. Lower the vehicle.
