Intrigue V6-3.8L VIN K (1998)
1. Install the brake caliper bracket (1).
CAUTION:
-
These fasteners MUST be replaced with new fasteners anytime they become loose or are removed. Failure to replace these fasteners
after they become loose or are removed may cause loss of vehicle control and personal injury.
-
These fasteners MUST be replaced with new fasteners anytime they become loose or are removed. Failure to replace these fasteners
after they become loose or are removed may cause loss of vehicle control and personal injury.
2. Install the NEW brake caliper bracket bolts.
-
Tighten the NEW brake caliper bracket bolts to 185 Nm (137 ft. lbs.).
3. Install the brake pad retainers (4) to the brake caliper bracket (3).
4. Apply a thin coat of silicone grease (GM P/N 18010909 or equivalent) to the brake pad retainers (4) where the brake pads (5) contact the brake
pad retainers.
5. Lubricate the brake caliper bolt boots with silicone grease (GM P/N 18010909 or equivalent).
6. Install the brake caliper bolt boots to the brake caliper bracket.
7. Install the brake pads (5) to the brake caliper bracket.
8. Install the brake caliper (2). Refer to Brake Caliper Replacement - Front.
