Intrigue V6-3.8L VIN K (1998)
17. Inspect the brake caliper bolt boots (4) for the following conditions:
-
Cuts
-
Tears
-
Deterioration
Replace the bolt boots if damage exists. Refer to Brake Caliper Bracket Replacement- Front.
18. Inspect the caliper bolts for corrosion or damage. If corrosion is found on the brake caliper bolt shaft, replace the brake caliper bolt and the brake
caliper bolt boot. Do not attempt to polish away the corrosion.
INSTALLATION PROCEDURE
1. Ensure that the caliper bolt boots (3) are properly installed.
2. Install the caliper to the caliper bracket.
3. Use silicone grease (GM P/N 18010909 or equivalent) to lubricate the brake caliper bolt shaft. Do not lubricate the bolt threads.
