Intrigue V6-3.8L VIN K (1998)
15. Use a strap (1) or heavy gage wire in order to support the brake caliper (2).
16. Inspect the piston boot for the following conditions:
-
Cuts
-
Tears
-
Deterioration
Replace the piston boot if damage exists. Refer to Brake Caliper Overhaul - Front.
17. Inspect the brake caliper bolt boots (4) for the following conditions:
-
Cuts
-
Tears
-
Deterioration
Replace the bolt boots if damage exists. Refer to Brake Caliper Bracket Replacement- Front.
18. Inspect the caliper bolts for corrosion or damage. If corrosion is found on the brake caliper bolt shaft, replace the brake caliper bolt and the brake
caliper bolt boot. Do not attempt to polish away the corrosion.
INSTALLATION PROCEDURE
