Intrigue V6-3.8L VIN K (1998)
1. Ensure that the caliper bolt boots (3) are properly installed.
2. Install the caliper to the caliper bracket.
3. Use silicone grease (GM P/N 18010909 or equivalent) to lubricate the brake caliper bolt shaft. Do not lubricate the bolt threads.
4. Use silicone grease to lubricate the brake caliper bolt boots (4) in the caliper bracket (3).
NOTICE: Refer to Fastener Notice in Service Precautions.
5. Install the brake caliper bolts. the brake caliper bolts to 85 Nm (63 ft. lbs.).
6. Use a flat-bladed tool in order to install the caliper bracket boot over the shoulder of the caliper bolt.
7. Remove the plugs in the brake hose end.
IMPORTANT: Install NEW copper brake hose gaskets (3).
