Intrigue V6-3.8L VIN K (1998)
2. Align each of the three motor pack pinions with the modulator gears.
Install the motor pack (1) to the modulator assembly (6).
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install four Torx(9 head screws (4).
-
Tighten the Torx head screws to 4.5 Nm (40 inch. lbs.).
4. Install the gear cover (3) onto the modulator/brake master cylinder assembly. Refer to Modulator Gear Cover Replacement.
