Intrigue V6-3.8L VIN K (1998)
Cruise Control Module: Service and Repair
REMOVAL PROCEDURE
Cruise Control Module Replacement: Removal Procedure
1. Disconnect the negative battery cable.
IMPORTANT: The cruise control module is mounted to the left strut tower. Service the cruise control module as a complete unit.
2. Remove the cruise control cable from the cruise control module. Perform the following:
2.1. Rotate the cruise control cable fitting counterclockwise at the module.
2.2. Gently pull the cruise control cable out from the module.
2.3. Remove the cruise control cable bead from the cruise control module ribbon.
3. Disconnect the electrical connector from the cruise control module.
Cruise Control Module Replacement: Removal Procedure
4. Remove the cruise control module nuts.
5. Remove the cruise control module from the shock tower studs.
INSTALLATION PROCEDURE
