Intrigue V6-3.8L VIN K (1998)
Cruise Control Cable Replacement: Removal Procedure
8. Remove the cruise control cable from the engine compartment.
INSTALLATION PROCEDURE
Cruise Control Cable Replacement: Installation Procedure
1. Install the cruise control cable to the engine compartment.
Cruise Control Cable Replacement: Installation Procedure
2. Install the cruise control cable to the throttle lever. Perform the following:
2.1. Hold the core wire adjuster at the side and slide it over the stud.
2.2. Pull adjuster body to open the throttle to wide open and let it back slowly.
2.3. Push adjuster clip to lock.
3. Snap the cruise control cable into the accelerator control cable bracket.
